|
Каталог
Основатель PIONEER стал Nozomu Matsumoto в 1937 году разработавший динамический громкоговоритель А-8
Подробнее о производителе
Глоссарий аббревиатур
|
|
|
Год начала выпуска: 1979
Регион: Европа
SPECIFICATIONS
The specifications for HG type is the same as the KU type except for following sections;
Semiconductors
Transistors...............................75
Preamplifier Section
TAPE 2 (DIN connector)
REC (Level/Impedance).........30mV/80 kilohms-
PLAY (Sensitivity/Impedance) ... 150mV/50 kilohms
Hum and Noise (DIN, Continuous Power/50mW)
PHONO 1 MM....................72dB/62dB
PHONO 2 MM.............;......72dB/62dB
TUNER, AUX, TAPE PLAY 1,2........90dB/62dB
Power Amplifier Section
Continuous Power Output at 1 kHz (both channel driven) T.H.D. 0.002%, 8 ohms.......100 watts per channel
Micellaneous
Power Requirements...........220V/240V, 50/60Hz
Power Consumption.................850W(max.)
Dimensions............420(W)x150(H)x425(D)mm
16-17/32(W)x5-29/32(H)x16-3/4(D)in
Weight (Without Package).........18.0kg (39 lb 11oz)
Semiconductors
ICs.................................. 3
FETs..................................6
Transistors ........................73
Diodes...............................36
Others .......................... 3
Power Amplifier Section
Continuous Power Output is 100watts* per channel, min.,
at 8 ohms from 10 Hertz to 20,000 Hertz with no more than 0.005% total harmonic distortion,
or 100 watts* per channel
at 4 ohms from 10 Hertz to 20,000 Hertz with no more than 0.005% total harmonic distortion.
Continuous Power Output
10Hz to 50kHz. . . 100W+ 100W (T.H.D. 0.01%, 8 ohms)
120W + 120W (T.H.D. 0.02%, 4 ohms)
Total Harmonic Distortion (10 Hertz to 20,000 Hertz)
continuous rated power output . . No more than 0.005%
50 watts per channel power output, 8 ohms
.....................No more than 0.004%
1 watt per channel power output, 8 ohms
.....................No more than 0.004%
Intermodulation Distortion (50 Hertz : 7,000 Hertz = 4:1)
continuous rated power output . . No more than 0.002%
50 watts per channel power output, 8 ohms
.....................No more than 0.002%
1 watt per channel power output, 8 ohms
.....................No more than 0.002%
Frequency Response........5 to 200,000 Hertz +0-2 dB
(POWER AMP IN)
Input (Sensitivity/Impedance)......... 1V/50kilohms
(POWER AMP IN) Output
Speaker..........................A, B, A+B
Headphones...................Low impedance
Damping Factor
(20 Hertz to 20,000 Hertz, 8 ohms) . ...........55
Hum and Noise
(IHF, short-circuited, A network)...........118dB
Preamplifier Section
Input (Sensitivity/Impedance)
PHONO 1 MM ..............2.5mV/50 kilohms
PHONO 2 MM..............2.5mV/50 kilohms
PHONO 2 MC............... 100/μV/100 ohms
CARTRIDGE LOAD..........Both Phono 1 and 2
100, 1 Ok, 25k, 50k, 100k ohms 100, 200, 300, 400, 500pF
TUNER...................150mV/50 kilohms
AUX.....................150mV/50 kilohms
TAPE PLAY 1..............150mV/50 kilohms
TAPE PLAY 2..............150mV/50 kilohms
Phono Overload Level (T.H.D. 0.002%, 1 kHz)
PHONO 1.........................250mV
PHONO 2............250mV (MM), 10mV (MC)
Output (Level/Impedance)
TAPE REC 1.......................150mV
TAPE REC 2.......................150mV
PRE OUT......1V/600ohms, 3V/600 ohms (max.)
Total Harmonic Distortion
10 to 50,000 Hertz, 1V output . . No more than 0.006%
Frequency Response
PHONO (RIAA Equalization)
..................20Hz to 20,000Hz ±0.2dE
TUNER, AUX, TAPE PLAY . . 5Hz to 100,000Hz +0-1 dB Tone Control
BASS 400Hz position . . . .+10dB, -10dB (100Hz)
200Hz position.....+ 10dB, -10dB (50Hz)
Turnover Frequency.......400Hz/200Hz
TREBLE 2,5kHz position. . . . +10dB, ~10dB (10kHz)
5kHz position.....+10dB, -10dB (20kHz)
Turnover Frequency.......2.5kHz/5kHz
Filter SUBSONIC..............15Hz (12dB/oct)
HIGH..................8kHz (12dB/oct)
Hum and Noise (IHF, short-circuited, A network)
PHONO MM/MC................. 90dB/72dB
TUNER, AUX, TAPE PLAY..............110dB
Muting'..............................-20dB
Loudness Contour (Volume control set at -40dB position) .....+6dB (100Hz), +3dB (10kHz)
Miscellaneous
Power Requirements.................120V, 60Hz
Power Consumption..................280W (UL)
Dimensions..........453(W) x 155(H) x 425(D) mm
17-11/16(W) x 6-1/8(H) x 16-3/4(D) in
Weight Without package.........18.4kg (40 lb 9 oz)
Furnished Parts
Operating instructions....................... 1
* Measured pursuant to Federal Trade Commission's Trade Regulation rule on Power Output Claims for Amplifier.
NOTE:
Specifications and the design subject to possible modification without notice due to improvements.
|
|
|
|
|
